£920.00 Exc VAT*
The Warrior Cut 80 Single-Phase Plasma Cutter is a portable inverter plasma cutting system with a 240V single-phase input. Its variable cutting control from 20-80A means it will easily cut metals up to 28mm thickness.
The Warrior Cut 80 Single-Phase Plasma Cutter has HF Ignition; the pilot arc automatically re-ignites enabling easy cutting of mesh or perforated materials. This plasma cutting machine is mounted on an easy lift frame with locking castor wheels, fitted with our heavy-duty P80 4m torch and is supplied with spare electrodes and tips.
The Warrior Cut 80 Plasma Cutter can be used with either our Bison Mark II 10kVA or Bison Whisper Single-Phase 10kVA Diesel Generator, running up to 60 Amps.
|Input voltage||240V single-phase|
|Duty cycle||80A @ 100%|
|Frame dimensions (L x W x H)||800 x 340 x 580mm|
|Stepless power control|
|Generator friendly||(12-15kVA recommended)|
|P80 4m Torch||Y|
|S105 6m torch||--|
|5m earth cable (with crocodile type clamp)||Y|
|5m SY armoured mains cable||Y|
|32A 3-pin mains plug||Y|
|32A 5-pin mains plug||--|
|Regulator fitted with water trap||Y|
|Mounted on industrial easy-lift frame with locking castors||Y|
|Shipped fully assembled, mounted on its cradle and on a pallet||Y|
|2m flexible exhaust hose||£45.00|
|10m 240V mains cable extension||£89.95|
|10m SY mains cable extension||£98.95|
|240V splitter cable||£46.95|
|Customer collection||From our premises by Appointment Only|
|Mainland UK||£60 (exclusions apply, enquire for further details)|
|Republic of Ireland||£160|
Be among the first to hear about new arrivals and any special offers or exciting news we have to share.
We promise not to share your information with anyone or use your email for spam.
A couple of years ago I needed a new welder in a pinch as mine died in the middle of a job. I called Phil and his team, who stayed open so that I would have time to travel and collect a 250A MIG welder. Two years later, it’s been absolutely flawless and welds brilliantly. When my cheap plasma cutter died I knew exactly where to source a new machine and, after a phone call, I collected my new 80A plasma cutter. I was not disappointed and the new machine performs perfectly. I’d recommend Warrior equipment to anyone. If you’re in any doubt pop over and try the machines. They let you try the very machine you’ll be taking home so you know that it’s right before you leave.
(0) (0) Watch Unwatch