CONTACT US
CONTACT US TODAY
CONTACT US

WARRIOR 250 SINGLE-PHASE MIG WELDER

£975.00 Exc VAT*

IN STOCK

The Warrior 250 Single-Phase MIG Welder is a 250 Amp portable inverter MIG welder with a 240V single-phase input making it ideal for on-site fabrication. Weighing only 32kg, including a 15kg wire spool with cover, this welding machine is highly portable making it easy for transporting to site.

The Warrior 250 Single-Phase MIG Welder has soft start and a powerful four roller wire-feed, making it ideal for aluminium MIG welding. Our optional Warrior Aluminium MIG Welding Kit enables you to modify your Warrior 250 MIG Welder to start welding aluminium immediately.

Straightforward to use and high-quality, this MIG welding machine is constructed using IGBTs and plug in circuit boards for reliability and easy maintenance. Our 250A MIG welder provides stepless adjustable welding voltage and current with excellent welding characteristics, including variable burnback and spatter control.

The Warrior 250 Single-Phase MIG Welder is mounted on an easy lift frame, can also be mounted on the Warrior Bottle Carrying Trolley along with by a full-size cylinder of gas, and its highly efficient design allows it to run off either our Bison Mark II 10kVA or Bison Whisper Single-Phase 10kVA Diesel Generator.

NEW! BUILD YOUR OWN MACHINE
ENQUIRE ABOUT MACHINE
BUILD YOUR CUSTOM MACHINE
Technical Information

Specifications

Input voltage240V single-phase
Duty cycle250A @ 100%
Wire range0.6-1.2mm
Spool sizeUp to 15kg
Weight 17kg
Frame dimensions (L x W x H)790 x 340 x 670mm
Digital amp/voltmeterFully calibrated
Four roller drive
Soft start
Stepless power control
Variable spatter control (inductance)
Automatic burnback control
Generator friendly

Supplied With

PRO15 3m torch--
PRO25 4m torchY
PRO36 4m torch--
DF605W 4m water-cooled torch--
3m earth cable (with crocodile type clamp)--
5m earth cable (with crocodile type clamp)Y
5m earth cable (with screw clamp)--
3m rubber mains cable--
5m SY armoured mains cableY
10m SY armoured mains cable--
16A 3-pin mains plugY
16A 4-pin mains plug--
32A 3-pin mains plug--
32A 5-pin mains plug--
5m interconnecting cables--
0.6/0.8mm drive roller set--
1.0/1.2mm drive roller setY
Warrior argon regulatorY
3m argon hose--
5m argon hoseY
10m argon hose--
5-year warrantyY
Mounted on industrial easy-lift frame with locking castorsY
Mounted on bottle carrying trolley with water cooler--
Shipped fully assembled, mounted on its cradle and on a palletY
Upgrades & Additional Options

Upgrades

PRO25 5m torch£10.05

Additional Options

16-13A mains adapter£38.00
16-32A mains adapter £38.00
10m 240V mains cable extension--
10m SY mains cable extension£98.95
10m Argon hose extension£49.95
0.6/0.8mm drive roller set--
0.8/1.0mm drive roller set£36.00
1.0/1.2mm drive roller set--
1.2/1.6mm drive roller set--
Knurled drive roller set--
3m arc welding cable --
5m arc welding cable--
Arc gauging torch--
WP9V 12.5ft TIG torch--
WP17V 12.5ft TIG torch--
Bison Mark II Generator£1650.00
Bison Whisper Generator£1995.00
Water cooled-option (Warrior water cooler, DF605 4m torch & Bottle Carrying Trolley)£1115.19
Built-in Goblin Fume Extraction--
Shipping & Services

Shipping

Customer collectionFrom our premises by Appointment Only
Mainland UK£60 (exclusions apply, enquire for further details)
Northern Ireland£135
Republic of Ireland£160

Services & Support

  • All of our machines are set up and tested to the customers’ requirements
  • Full product support is provided by our engineers
  • Our team carry out services and repairs on all makes and models of machines
  • With every future Warrior Welders service, your machine will receive a 1-year warranty; our ‘Lifetime Warranty’
Review / Q&As

Share your thoughts!

5 out of 5 stars

2 reviews

5 2
4 0
3 0
2 0
1 0

Let us know what you think...

Leave a Review Ask a Question Post a Video Post a Photo

What others are saying

  1. warriorwelders

    Best welder

    warriorwelders –

    In my workshop I am the ‘newbie’ to welding as I have only been doing it for 20 years. John has been welding since he left school at 16 and Paul about the same, so combined we have around 100 years of welding experience and we can honestly say that this is the best welder we have used, in terms of power, control and simplicity of use. So much so that we were looking to replace our over-complicated TIG with one of your Ali MIG set ups.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

  2. warriorwelders

    Many thanks for a superb machine

    warriorwelders –

    This little 250 MIG welder is more than capable of welding 25mm thick steel and is easy to move in difficult locations. I carry out maintenance at a recycling company and this machine has proved invaluable with a wide variety of repair and fabrication work. The photo shows this machine about 30ft up on a wash plant, repairing a 3mm corroded water chute. With the wire removed it is light and compact enough to take it up on the narrow walkways, and a long gas pipe reaches the ground. These machines require a good power supply, we use a 32 amp single phase socket. Many thanks for a superb machine.

    (0) (0)

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...

×

Login

Continue as a Guest

Continue as a Guest

Share on Facebook
Share on Twitter
Pin on Pintrest
Email this product
Whatsapp this product

Related Products

Related products

WHAT OUR CUSTOMERS SAY

This plasma is brilliant!


We have been able to gouge holders out of shredders, saving time and money on gas and gouging rods, as well as cutting and chamfering plate onsite reducing both our consumable costs and our labour costs to our customers. The service we have received from Phil and the team at Warrior Welders has also been fantastic and we look forward to using their equipment moving forward.
Matt
MD, Plantweld Ltd.

Impressive bit of kit


Received delivery of the welder this morning, thank you. Have run it off our geny and, I must say, that is an impressive bit of kit for a 240V welder. And, after putting it through its paces, it certainly lives up to its name… proper little “WARRIOR”. It ran faultlessly on a 10-hour shift, running 1.2 hardfacing cored wire, until we ran out of wire then ran it on 1.6 wire, which is all we had left. A little tweak with the rollers and it just carried on and on. Would definitely recommend this little gem.
Customer
Warrior Welders

A great team and a truly perfect product


I bought a Cut 100 nearly a year ago. Phil and his excellent team looked at my old plasma and advised me mine was past repair. Once I tried his Cut 100 there was no going back. Recently I took it back for his team to look at because I could get it to work and it turned out to be my fault. They made me a coffee with biscuits and fixed my error without judgement. Made me feel more than welcome. I cannot recommend this company enough. They have a wonderful set up with a great team and a truly perfect product. Thanks.
Customer
Warrior Welders

FOLLOW US ON FACEBOOK

#WARRIORWELDERS

Warrior_Welders_Welding_Machines_Services_Warrior_Welders_Logo_White

If you are interested in our machines, we can arrange a demonstration for you in store or alternatively visit you on-site.

  • @WarriorWelders

QUICK LINKS

  • Warrior Welders Ltd, Unit 1, Lapdown Workshops, Marshfield Road, Tormarton, Badminton, Gloucestershire, GL9 1JE

WHERE TO FIND US

(c) Copyright 2022 Warrior Welders Ltd | All Rights Reserved
Warrior_Welders_Welding_Machines_Services_Warrior_Welders_Logo_Blue
VIEW OUR EBAY STORE

SIGN UP TO OUR MAILING LIST

Be among the first to hear about new arrivals and any special offers or exciting news we have to share.

We promise not to share your information with anyone or use your email for spam.