Description
Warrior 250 MIG Welder Specifications:
| Input voltage | 240V single-phase |
| Duty cycle | 250A @ 100% |
| Wire range | 0.6-1.2mm |
| Spool size | Up to 15kg |
| Weight | 17kg |
| Frame dimensions (L x W x H) | 790 x 340 x 670mm |
| Digital amp/voltmeter | Fully calibrated |
| Four roller drive | |
| Soft start | |
| Stepless power control | |
| Variable spatter control (inductance) | |
| Automatic burnback control |
Supplied With:
• PRO25 4m torch
• 5m earth cable with crocodile type clamp
• 5m SY armoured mains cable
• Warrior argon regulator
• 5m argon hose
• Mounted on industrial easy-lift frame with locking castors
• 5-year parts and labour warranty (excl. consumable items). Thereafter, with every Warrior Welders service, your machine will receive a 1-year warranty; our ‘Lifetime Warranty’
• Shipped fully assembled, mounted on its cradle and on a pallet
Bison Mark II Generator Specifications:
| Output voltage | 110V/240V single-phase |
| Output current | 32A |
| Engine capacity | 680cc |
| Power produced | 15hp / 3000rpm |
| Continuous output power | 10kVA |
| Maximum output power | 12kVA |
| Frequency | 50Hz |
| Fuel tank capacity | 12L |
| Fuel type | Diesel Light (BS-AI or equivalent) |
| Oil tank capacity | 2L |
| Oil type | 15W-40 |
| Power factor | 1.0 |
| Noise level | 90dB |
| Dry weight | 138kg |
| Gross weight | 152kg |
| Frame dimensions (L x W x H) | 900 x 670 x 800mm |
Supplied With:
• 12V (36AH) battery
• 1-year (or first 1000 hours of use) parts and labour warranty (excl. consumable items)
• Shipped fully assembled, mounted on its cradle and on a pallet
Shipping:
• Customer collection from our premises by appointment only
• Mainland UK: £60 (exclusions apply, enquire for further details)
• NI: £115
• ROI: £160
Support & Services:
• All of our machines are set up and tested to the customers’ requirements
• Full product support is provided by our engineers
• Our team carry out services and repairs on all makes and models of machines
warriorwelders –
Everything is superb – I have been welding with it for about 2 hours now, configured and marked up all my amp settings and it runs great and super smooth, especially at 220 amps where, with a steady hand, it only deviates +/-2 amps! Salute to Phil for doing a remarkable job on setting these up! For many years I have pondered on having a MIG plant running off a genny instead of using genset stick, especially for speed and troublesome large gaps to fill. Can’t wait to get out onsite and try it.
(0) (0) Watch Unwatch
warriorwelders –
That’s the 250 powered by the new 10kva generator. Near Bradford on Avon and it’s an adaptor plate for the front of a telehandler. Welding 1.2mm wire at 225 amps.
(0) (0) Watch Unwatch
warriorwelders –
I would just like to say thank you for the explanations and overall experience. When I returned home I couldn’t wait to get stuck in. This welder is without doubt the finest machine I’ve ever used, especially on thin sheet steel, I would never have believed it if I hadn’t seen it with my own eyes, that a MIG of all things could weld two thin pieces of sheet on its ends. Thanks Phil for your effort in maintaining the notion that we in this country can still produce the best welding machines. Your dedication and commitment to making such an excellent product at an affordable price leaves me speechless.
(0) (0) Watch Unwatch