CONTACT US
CONTACT US TODAY
CONTACT US

Bison Mark II 10kVA Diesel Generator

£1,650.00 Exc VAT*

IN STOCK

The Bison Mark II is a portable, air-cooled, single-cylinder, 680cc, 10kVA diesel generator, producing 110V and 240V single-phase 32 Amp output.

The Bison Mark II 10kVA Diesel Generator comes complete with a remote start/stop key fob, is open-framed and has a 680cc electric-start diesel engine which produces 15hp. It is fitted with a low oil pressure alert system that shuts down the engine automatically. The Bison Mark II has a 12V battery charging output and a modified AVR (Automatic Voltage Regulator) that reacts to an inductive load, delivering a non-fluctuating current; ideal for running a Warrior single-phase machine, particularly the Warrior 250 Single-Phase MIG Welder.

NEW! BUILD YOUR OWN MACHINE
ENQUIRE ABOUT MACHINE
BUILD YOUR CUSTOM MACHINE
Technical Information

Specifications

Output voltage110V/240V single-phase
Output current32A
Engine capacity680cc
Power produced15hp / 3000rpm
Continuous output power10kVA
Maximum output power12kVA
Frequency50Hz
Fuel tank capacity12L
Fuel typeDiesel Light (BS-AI or equivalent)
Oil tank capacity2L
Oil type15W-40
Power factor1.0
Noise level90dB
Dry weight138kg
Gross weight152kg
Frame dimensions (L x W x H) 900 x 670 x 800mm
Remote wireless key fob start/stop
Modified AVR

Supplied With

  • 12V battery
  • 1-year warranty
  • Shipped fully assembled, mounted on its cradle and on a pallet
Upgrades & Additional Options

Upgrades

2m Flexible Exhaust£45.00
240V Splitter Cable£46.95
10m SY mains cable extensionY
10m Mains Extension Cable£98.95
Solar-Powered Battery Charger£39.95
Automatic Changeover Switch£182.00
*We recommend purchasing the Automatic Changeover Switch. This unit can be wired into the Bison Whisper Generator. It will constantly monitor the mains voltage. If there is a power cut, the unit will start the generator and, after a few minutes, once the generator is warmed up, it will switch from mains to generator. Once the mains power has been restored, it will switch back from generator to mains and, after a few minutes, turn the generator off. This unit has a built-in battery charging circuit, which ensures the generator battery is always fully charged.
Shipping & Services

Shipping

Customer collectionFrom our premises by Appointment Only
Mainland UK£60 (exclusions apply, enquire for further details)
Northern Ireland£135
Republic of Ireland£160

Services & Support

  • All of our machines are set up and tested to the customers’ requirements
  • Full product support is provided by our engineers
  • Our team carry out services and repairs on all makes and models of machines
  • With every future Warrior Welders service, your machine will receive a 1-year warranty; our ‘Lifetime Warranty’
Review / Q&As

Share your thoughts!

Let us know what you think...

Leave a Review Ask a Question Post a Video Post a Photo

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Continue as a Guest

Share on Facebook
Share on Twitter
Pin on Pintrest
Email this product
Whatsapp this product

Related Products

Related products

WHAT OUR CUSTOMERS SAY

This plasma is brilliant!


We have been able to gouge holders out of shredders, saving time and money on gas and gouging rods, as well as cutting and chamfering plate onsite reducing both our consumable costs and our labour costs to our customers. The service we have received from Phil and the team at Warrior Welders has also been fantastic and we look forward to using their equipment moving forward.
Matt
MD, Plantweld Ltd.

Impressive bit of kit


Received delivery of the welder this morning, thank you. Have run it off our geny and, I must say, that is an impressive bit of kit for a 240V welder. And, after putting it through its paces, it certainly lives up to its name… proper little “WARRIOR”. It ran faultlessly on a 10-hour shift, running 1.2 hardfacing cored wire, until we ran out of wire then ran it on 1.6 wire, which is all we had left. A little tweak with the rollers and it just carried on and on. Would definitely recommend this little gem.
Customer
Warrior Welders

A great team and a truly perfect product


I bought a Cut 100 nearly a year ago. Phil and his excellent team looked at my old plasma and advised me mine was past repair. Once I tried his Cut 100 there was no going back. Recently I took it back for his team to look at because I could get it to work and it turned out to be my fault. They made me a coffee with biscuits and fixed my error without judgement. Made me feel more than welcome. I cannot recommend this company enough. They have a wonderful set up with a great team and a truly perfect product. Thanks.
Customer
Warrior Welders

FOLLOW US ON FACEBOOK

#WARRIORWELDERS

Warrior_Welders_Welding_Machines_Services_Warrior_Welders_Logo_White

If you are interested in our machines, we can arrange a demonstration for you in store or alternatively visit you on-site.

  • @WarriorWelders

QUICK LINKS

  • Warrior Welders Ltd, Unit 1, Lapdown Workshops, Marshfield Road, Tormarton, Badminton, Gloucestershire, GL9 1JE

WHERE TO FIND US

(c) Copyright 2022 Warrior Welders Ltd | All Rights Reserved
Warrior_Welders_Welding_Machines_Services_Warrior_Welders_Logo_Blue
VIEW OUR EBAY STORE

SIGN UP TO OUR MAILING LIST

Be among the first to hear about new arrivals and any special offers or exciting news we have to share.

We promise not to share your information with anyone or use your email for spam.